#! /bin/sh
#
# Copyright Intel Corporation.
# 
# This software and the related documents are Intel copyrighted materials, and
# your use of them is governed by the express license under which they were
# provided to you (License). Unless the License provides otherwise, you may
# not use, modify, copy, publish, distribute, disclose or transmit this
# software or the related documents without Intel's prior written permission.
# 
# This software and the related documents are provided as is, with no express
# or implied warranties, other than those that are expressly stated in the
# License.
##
## Copyright (C) by Argonne National Laboratory
# 
# 				  COPYRIGHT
# 
# The following is a notice of limited availability of the code, and disclaimer
# which must be included in the prologue of the code and in all source listings
# of the code.
# 
# Copyright Notice
# 1998--2020, Argonne National Laboratory
# 
# Permission is hereby granted to use, reproduce, prepare derivative works, and
# to redistribute to others.  This software was authored by:
# 
# Mathematics and Computer Science Division
# Argonne National Laboratory, Argonne IL 60439
# 
# (and)
# 
# Department of Computer Science
# University of Illinois at Urbana-Champaign
# 
# 
# 			      GOVERNMENT LICENSE
# 
# Portions of this material resulted from work developed under a U.S.
# Government Contract and are subject to the following license: the Government
# is granted for itself and others acting on its behalf a paid-up, nonexclusive,
# irrevocable worldwide license in this computer software to reproduce, prepare
# derivative works, and perform publicly and display publicly.
# 
# 				  DISCLAIMER
# 
# This computer code material was prepared, in part, as an account of work
# sponsored by an agency of the United States Government.  Neither the United
# States, nor the University of Chicago, nor any of their employees, makes any
# warranty express or implied, or assumes any legal liability or responsibility
# for the accuracy, completeness, or usefulness of any information, apparatus,
# product, or process disclosed, or represents that its use would not infringe
# privately owned rights.
# 
# 			   EXTERNAL CONTRIBUTIONS
# 
# Portions of this code have been contributed under the above license by:
# 
#  * Intel Corporation
#  * Cray
#  * IBM Corporation
#  * Microsoft Corporation
#  * Mellanox Technologies Ltd.
#  * DataDirect Networks.
#  * Oak Ridge National Laboratory
#  * Sun Microsystems, Lustre group
#  * Dolphin Interconnect Solutions Inc.
#  * Institut Polytechnique de Bordeaux
#
##     
##

# Simple script to compile and/or link MPI programs.
# This script knows the default flags and libraries, and can handle
# alternative C compilers and the associated flags and libraries.
# The important terms are:
#    includedir, libdir - Directories containing an *installed* mpich
#    prefix, execprefix - Often used to define includedir and libdir
#    F77                - Fortran 77 compiler
#    WRAPPER_FFLAGS     - Any special flags needed to compile
#    WRAPPER_LDFLAGS    - Any special flags needed to link
#    WRAPPER_LIBS       - Any special libraries needed in order to link
#    F77_OTHER_LIBS     - Yet more libraries, needed just with F77
#
#
# We assume that (a) the C compiler can both compile and link programs
#
# Handling of command-line options:
#   This is a little tricky because some options may contain blanks.
#
# Special issues with shared libraries - todo
#
# --------------------------------------------------------------------------
# Set the default values of all variables.
#
# Directory locations: Fixed for any MPI implementation.
# Set from the directory arguments to configure (e.g., --prefix=/usr/local)
prefix=I_MPI_SUBSTITUTE_INSTALLDIR
if [ -n "${I_MPI_ROOT}" ] ; then
    prefix="${I_MPI_ROOT}";
fi

exec_prefix=__EXEC_PREFIX_TO_BE_FILLED_AT_INSTALL_TIME__
sysconfdir=${prefix}/etc
includedir=${prefix}/include
libdir=${prefix}/lib

if [ ! -f "${prefix}/lib/mpi/debug/libmpi.so" ]; then
    release_lib_dir="/release"
    debug_lib_dir="/debug"
else
    sysconfdir=${prefix}/opt/mpi/etc
    release_lib_dir=""
    debug_lib_dir="/mpi/debug"
fi
MPILIBDIR=${release_lib_dir}
# The environment variable I_MPI_COMPILER_CONFIG_DIR may be used to override
# folder where *.conf files are placed
if [ -n "$I_MPI_COMPILER_CONFIG_DIR" ] ; then
    sysconfdir=$I_MPI_COMPILER_CONFIG_DIR;
fi
# Default settings for compiler, flags, and libraries
# Determined by a combination of environment variables and tests within
# configure (e.g., determining whehter -lsocket is needee)
F77="gfortran"
F77CPP=""
MPICH_VERSION="3.4a2"
MPIVERSION="2021.14"
FFLAGS=""
MPILIBNAME="mpi"


# How to pass a linker flag through the compiler.
wl=""

# Static library suffix (normally "a").
libext="a"

# Shared library suffix (normally "so").
shlibext="so"

# Format of library name prefix.
libname_spec="lib\$name"

# Library names that the linker finds when passed -lNAME.
library_names_spec="\$libname\$shrext"

# Flag to hardcode $libdir into a binary during linking.
# This must work even if $libdir does not exist.
hardcode_libdir_flag_spec="\${wl}-rpath \${wl}\$libdir"

# Flag to add dtags to allow using runpath instead of rpath
enable_dtags_flag=""
disable_dtags_flag=""

# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator=""

# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
# resulting binary.
hardcode_direct="no"

# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L="no"


strip_debug_info=
handle_executable=
executable=a.out
static_log=yes
ilp64=no
no_ilp64=
trace_opt=no
no_rpath=no
# Attempt to construct dynamic loading info, based on the user
# preference of rpath, runpath or none and on the detected libdir
# flags.
with_wrapper_dl_type=no
if test "X${with_wrapper_dl_type}" = "Xrunpath" ; then
    eval wrapper_dl_type_flags=\"${hardcode_libdir_flag_spec} ${enable_dtags_flag}\"
elif test "X${with_wrapper_dl_type}" = "Xrpath" ; then
    eval wrapper_dl_type_flags=\"${hardcode_libdir_flag_spec} ${disable_dtags_flag}\"
else
    wrapper_dl_type_flags=""
fi

# Internal variables
# Show is set to echo to cause the compilation command to be echoed instead 
# of executed.
Show=eval
#
# End of initialization of variables
#---------------------------------------------------------------------
# Environment Variables.
# The environment variables I_MPI_F77, MPICH_F77 may be used to override the
# default choices. I_MPI_F77 has higher priority than MPICH_F77.
# In addition, if there is a file $sysconfdir/mpif77-$F77name.conf,
# where F77name is the name of the compiler with all spaces replaced by hyphens
# (e.g., "f77 -64" becomes "f77--64", that file is sources, allowing other
# changes to the compilation environment.  See the variables used by the 
# script (defined above)
# Added MPICH_F77_OLD, MPICH_F77 can be used to prefix F77
# with external utility, e.g. setenv MPICH_F77 'eval linkcache $MPICH_F77_OLD'
if [ -n "$I_MPI_FFLAGS" ] ; then
    FFLAGS=" "$I_MPI_FFLAGS
fi
if [ -n "$I_MPI_LDFLAGS" ] ; then
    LDFLAGS=" -ldl "$I_MPI_LDFLAGS 
fi
if [ -n "$I_MPI_F77" ] ; then
    F77="$I_MPI_F77"                
    F77name=`echo $F77 | sed 's/ /-/g'`
    if [ -s $sysconfdir/mpif77-$(basename $F77name).conf ] ; then
        . $sysconfdir/mpif77-$(basename $F77name).conf
    fi
else
    if [ -n "$MPICH_F77" ] ; then
        F77="$MPICH_F77"
        F77name=`echo $F77 | sed 's/ /-/g'`
        if [ -s $sysconfdir/mpif77-$(basename $F77name).conf ] ; then
            . $sysconfdir/mpif77-$(basename $F77name).conf
        fi
    fi
fi
if [ -n "$I_MPI_DEBUG_INFO_STRIP" ] ; then
    for comp_val in "0" "off" "no" "disable"
    do
        if [ "$I_MPI_DEBUG_INFO_STRIP" = "$comp_val" ] ; then
            strip_debug_info=no
            break
        fi
    done
fi
# Allow a profiling option to be selected through an environment variable
if [ -n "$MPIF77_PROFILE" ] ; then
    profConf=$MPIF77_PROFILE
fi
if [ -n "$I_MPI_F77_PROFILE" ] ; then
    profConf=$I_MPI_F77_PROFILE
fi
if [ -n "$MPIFC_PROFILE" ] ; then
    profConf=$MPIFC_PROFILE
fi
if [ -n "$I_MPI_FC_PROFILE" ] ; then
    profConf=$I_MPI_FC_PROFILE
fi

# Override default mpi library
if [ -n "$I_MPI_LINK" ] ; then
    mpilib_override=$I_MPI_LINK
fi

# ------------------------------------------------------------------------
# Argument processing.
# This is somewhat awkward because of the handling of arguments within
# the shell.  We want to handle arguments that include spaces without
# loosing the spacing (an alternative would be to use a more powerful
# scripting language that would allow us to retain the array of values,
# which the basic (rather than enhanced) Bourne shell does not.
#
# Look through the arguments for arguments that indicate compile only.
# If these are *not* found, add the library options

linking=yes
allargs=""
argno=0
cppflags=""
interlib_deps=yes
static_mpi=no
for arg in "$@" ; do
    # Set addarg to no if this arg should be ignored by the C compiler
    addarg=yes
    qarg=$arg
    if [ "x$handle_executable" = "xyes" ] ; then
    executable=$arg
    handle_executable=
    fi
    case "$arg" in
    # ----------------------------------------------------------------
    # Compiler options that affect whether we are linking or no
    -c|-S|-E|-M|-MM)
    # The compiler links by default
    linking=no
    ;;
    -o )
    handle_executable=yes
    addarg=yes
    ;;
    # ----------------------------------------------------------------
    # Options that control how we use mpif77 (e.g., -show, 
    # -f77=* -config=*
    -static)
    interlib_deps=no
    static_mpi=yes
    static_log=yes
    FFLAGS="$FFLAGS -Xlinker --export-dynamic"
    addarg=yes
    ;;
    -static-mpi)
    interlib_deps=no
    static_mpi=yes
    FFLAGS="$FFLAGS -Xlinker --export-dynamic"
    addarg=no
    ;;
    -echo)
    addarg=no
    set -x
    ;;

    -f77=*)
    F77=`echo A$arg | sed -e 's/A-f77=//g'`
    if [ "$#" -eq "1" ] ; then
        echo "Error: extra arguments required"
        echo "usage: mpif77 -f77=<name> -v"
        exit 1
    fi
    addarg=no
    ;;
    -fc=*)
    F77=`echo A$arg | sed -e 's/A-fc=//g'`
    if [ "$#" -eq "1" ] ; then
        echo "Error: extra arguments required"
        echo "usage: mpif77 -fc=<name> -v"
        exit 1
    fi
    addarg=no
    ;;

    -show)
    addarg=no
    Show=echo
    ;;
    -config=*)
    addarg=no
    F77name=`echo A$arg | sed -e 's/A-config=//g'`
    if [ -s "$sysconfdir/mpif77-$F77name.conf" ] ; then
        . "$sysconfdir/mpif77-$F77name.conf"
    else
    echo "Configuration file mpif77-$F77name.conf not found"
    fi
    ;;
    -compile-info|-compile_info)
    # -compile_info included for backward compatibility
    Show=echo
    addarg=no
    ;;
    -link-info|-link_info)
    # -link_info included for backward compatibility
    Show=echo
    addarg=no
    ;;
    -v)
    # Pass this argument to the compiler as well.
    echo "$(basename $0) for the Intel(R) MPI Library $MPIVERSION for Linux*"
    echo "Copyright Intel Corporation."
    linking=no
    ;;
    -profile=*)
    # Pass the name of a profiling configuration.  As
    # a special case, lib<name>.so or lib<name>.la may be used
    # if the library is in $libdir
    profConf=`echo A$arg | sed -e 's/A-profile=//g'`
    addarg=no
    # Loading the profConf file is handled below
    ;;
    -help)
    # Print mini-help if started without parameters
    echo "Simple script to compile and/or link MPI programs."
    echo "Usage: `basename $0` [options] <files>"
    echo "----------------------------------------------------------------------------"
    echo "The following options are supported:"
    echo "   -fc=<name> | -f77=<name>"
    echo "                   specify a FORTRAN compiler name: i.e. -fc=g77"
    echo "   -echo           print the scripts during their execution"
    echo "   -show           show command lines without real calling"
    echo "   -config=<name>  specify a configuration file: i.e. -config=g77 for mpif77-g77.conf file"
    echo "   -v              print version info of $(basename $0) and its native compiler"
    echo "   -profile=<name> specify a profile configuration file (an MPI profiling"
    echo "                   library): i.e. -profile=myprofile for the myprofile.cfg file."
    echo "                   As a special case, lib<name>.so or lib<name>.a may be used"
    echo "                   if the library is found"
    echo "   -check_mpi      link against the Intel(R) Trace Collector (-profile=vtmc)."
    echo "   -static_mpi     link the Intel(R) MPI Library statically"
    echo "   -mt_mpi         link the thread safe version of the Intel(R) MPI Library"
    echo "   -ilp64          link the ILP64 support of the Intel(R) MPI Library"
    echo "   -no_ilp64       disable ILP64 support explicitly"
    echo "   -t or -trace"
    echo "                   link against the Intel(R) Trace Collector"
    echo "   -trace-imbalance"
    echo "                   link against the Intel(R) Trace Collector imbalance library"
    echo "                   (-profile=vtim)"
    echo "   -dynamic_log    link against the Intel(R) Trace Collector dynamically"
    echo "   -static         use static linkage method"
    echo "   -nostrip        turn off the debug information stripping during static linking"
    echo "   -O              enable optimization"
    echo "   -link_mpi=<name>"
    echo "                   link against the specified version of the Intel(R) MPI Library"
    echo "                   i.e -link_mpi=opt|opt_mt|dbg|dbg_mt"
    echo "   -norpath        disable rpath for compiler wrapper of the Intel(R) MPI Library"
    echo "All other options will be passed to the compiler without changing."
    echo "----------------------------------------------------------------------------"
    echo "The following environment variables are used:"
    echo "   I_MPI_ROOT      the Intel(R) MPI Library installation directory path"
    echo "   I_MPI_F77 or MPICH_F77"
    echo "                   the path/name of the underlying compiler to be used"
    echo "   I_MPI_FC_PROFILE or I_MPI_F77_PROFILE or MPIF77_PROFILE"
    echo "                   the name of profile file (without extension)"
    echo "   I_MPI_COMPILER_CONFIG_DIR"
    echo "                   the folder which contains configuration files *.conf"
    echo "   I_MPI_TRACE_PROFILE"
    echo "                   specify a default profile for the -trace option"
    echo "   I_MPI_CHECK_PROFILE"
    echo "                   specify a default profile for the -check_mpi option"
    echo "   I_MPI_LINK      specify the version of the Intel(R) MPI Library"
    echo "   I_MPI_DEBUG_INFO_STRIP"
    echo "                   turn on/off the debug information stripping during static linking"
    echo "   I_MPI_FFLAGS"
    echo "                   special flags needed for compilation"
    echo "   I_MPI_LDFLAGS "
    echo "                   special flags needed for linking" 
    echo "----------------------------------------------------------------------------"
    exit 0
    ;;
    -nolinkage)
    # This internal option is used by wrapper driver scripts mpicc, mpicxx, mpifc when -v option is used.
    linking=no
    addarg=no
    ;;
    -g)
    MPILIBDIR=${release_lib_dir}
    ;;
    -static_log)
    static_log=yes
    addarg=no
    ;;
    -dynamic_log)
    static_log=no
    addarg=no
    ;;
    -mt_mpi)
    addarg=no
    ;;
    -ilp64)
    ilp64=yes
    addarg=no
    ;;
    -i8)
    if [ -z "$no_ilp64" ] ; then
        ilp64=yes
    fi
    if [ "$F77" = gfortran ]; then
        FFLAGS="-fdefault-integer-8 $FFLAGS"
        addarg=no
    else
        addarg=yes
    fi
    ;;
    -fdefault-integer-8)
    if [ -z "$no_ilp64" ] ; then
        ilp64=yes
    fi
    ;;
    -no_ilp64)
    no_ilp64=yes
    ilp64=no
    addarg=no
    ;;
    -check_mpi)
    if [ -z "$profConf" ]; then
        if [ -z "$I_MPI_CHECK_PROFILE" ]; then
            profConf="vtmc"
        else
            profConf="$I_MPI_CHECK_PROFILE"
        fi
    else
        echo "Warning: the -check_mpi option will be ignored because the profile was set."
    fi
    addarg=no
    ;;
    -trace-imbalance)
    if [ -z "$profConf" ]; then
        profConf="vtim"
    else
        echo "Warning: the -trace-imbalance option will be ignored because the profile was set."
    fi
    addarg=no
    ;;
    -t | -trace | -t=* | -trace=* )
    if [ -z "$profConf" ]; then
        if [ -z "$I_MPI_TRACE_PROFILE" ]; then
            profConf="vt"
        else
            profConf="$I_MPI_TRACE_PROFILE"
        fi
    else
        echo "Warning: the -trace option will be ignored because the profile was set."
    fi
    addarg=no
    ;;
    -nativelinking)
    # Internal option to use native compiler for linking without MPI libraries
    nativelinking=yes
    addarg=no
    ;;
    -link_mpi=* )
    mpilib_override=`echo A$arg | sed -e 's/A-link_mpi=//g'`
    addarg=no
    ;;
    -nostrip )
    strip_debug_info=no
    addarg=no
    ;;
    -norpath )
    no_rpath=yes
    addarg=no
    ;;
    # -----------------------------------------------------------------
    # Other arguments.  We are careful to handle arguments with
    # quotes (we try to quote all arguments in case they include
    # any spaces)
    *\"*)
    qarg="'"$arg"'"
    case $arg in
       -D*)
       cppflags="$cppflags $qarg"
       ;;
    esac
    ;;
    *\'*)
    qarg=`echo \"$arg\"`
    case $arg in
       -D*)
       cppflags="$cppflags $qarg"
       ;;
    esac
    ;;

    # The following are special args used to handle .F files when the
    # Fortran compiler itself does not handle these options
    -I*)
    cppflags="$cppflags $arg"
    ;;
    -D*)
    cppflags="$cppflags $arg"
    ;;
    *.F|*.F90|*.fpp|*.FPP)
# If F77CPP is not empty, then we need to do the following:
#    If any input files have the .F or .F90 extension, then
#        If F77CPP = false, then
#            generate an error message and exit
#        Use F77CPP to convert the file from .F to .f, using
#            $TMPDIR/f$$-$count.f as the output file name
#            Replace the input file with this name in the args
# This is needed only for very broken systems
#
    if [ -n "$F77CPP" ] ; then
        if [ "$F77CPP" = "false" ] ; then
            echo "This Fortran compiler does not accept .F or .F90 files"
        exit 1
        fi
        addarg=no
    # Remove and directory names and extension
    $ext=`expr "$arg" : '.*\(\..*\)'`
        bfile=`basename $arg $ext`
    #
    TMPDIR=${TMPDIR:-/tmp}
        tmpfile=$TMPDIR/f$$-$bfile.f
        if $F77CPP $cppflags $arg > $tmpfile ; then
            # Add this file to the commandline list
        count=`expr $count + 1`
        allargs="$allargs $tmpfile"
        rmfiles="$rmfiles $tmpfile"
        else
        echo "Aborting compilation because of failure in preprocessing step"
        echo "for file $arg ."
        exit 1
        fi
    fi
    # Otherwise, just accept the argument
    ;;
    # - end of special handling for .F files 
    *)
    qarg="'$arg'"
    ;;
    esac
    if [ $addarg = yes ] ; then
        allargs="$allargs $qarg"
    fi
done

if [ $# -eq 0 ] ; then
    echo "Error: Command line argument is needed!"
    "$0" -help
    exit 1
fi

if [ "${static_mpi}" = yes ] ; then
    mpilibs="$libdir/libmpi.a"
else
    mpilibs="-lmpi"     
fi

if [ -n "$mpilib_override" ] ; then
    case "$mpilib_override" in
    opt ) 
        MPILIBDIR=${release_lib_dir}
        ;;
    opt_mt )
        MPILIBDIR=${release_lib_dir}
        ;;
    dbg )
        MPILIBDIR=${debug_lib_dir}
        ;;
    dbg_mt )
        MPILIBDIR=${debug_lib_dir}
        ;;
    * )
        echo "Warning: incorrect library version specified. Automatically selected library will be used."
        ;;
    esac
fi
# -----------------------------------------------------------------------
if [ "$static_mpi" = yes ] ; then
    mpilibs="${libdir}/libmpifort.a ${libdir}${MPILIBDIR}/lib${MPILIBNAME}.a"
    I_MPI_OTHERLIBS=" -lrt -lpthread "
    if [ "$ilp64" = yes ]; then
    mpilibs="$libdir/libmpi_ilp64.a $mpilibs"
    fi
    if [ "x$strip_debug_info" = "x" ] ; then
    strip_debug_info=yes
    fi
else
    mpilibs="-lmpifort -l$MPILIBNAME"
    I_MPI_OTHERLIBS=" -lrt -lpthread "
    if [ "$ilp64" = yes ]; then
    mpilibs="-lmpi_ilp64 $mpilibs"
    fi
fi
# Derived variables.  These are assembled from variables set from the
# default, environment, configuration file (if any) and command-line
# options (if any)
f77libs=
if [ "mpifort" != "mpi" ] ; then
    if [ "${static_mpi}" = yes ] ; then
        f77libs="$libdir/libmpifort.a"
    else
        f77libs="-lmpifort"
    fi
fi

PROFILE_FOO=
# Handle the case of a profile switch
if [ -n "$profConf" ] ; then
    profConffile=
    if [ -s "$libdir/lib$profConf.a" -o -s "$libdir/lib$profConf.so" ] ; then
    PROFILE_FOO="-l$profConf"
            mpilibs="-l$profConf $mpilibs"
    elif [ -s "$sysconfdir/$profConf.conf" ] ; then
    profConffile="$sysconfdir/$profConf.conf"
    elif [ -s "$profConf.conf" ] ; then
        profConffile="$profConf.conf"
    else
        echo "Profiling configuration file $profConf.conf not found in $sysconfdir"
    fi
    if [ -n "$profConffile" -a -s "$profConffile" ] ; then
    . $profConffile
        if [ -n "$PROFILE_INCPATHS" ] ; then
           CFLAGS="$PROFILE_INCPATHS $CFLAGS"
        fi
        if [ -n "$PROFILE_PRELIB" ] ; then
           mpilibs="$PROFILE_PRELIB $mpilibs"
        fi
        if [ -n "$PROFILE_POSTLIB" ] ; then
           mpilibs="$mpilibs $PROFILE_POSTLIB"
        fi
    fi
fi

if [ "${static_mpi}" = "yes" ] ; then
    final_fflags="  -Xlinker --export-dynamic "
else
    final_fflags=" "
fi

final_ldflags="  -Wl,-z,now -Wl,-z,relro -Wl,-z,noexecstack -Xlinker --enable-new-dtags -ldl  "
final_libs="-lpthread -lrt "

# A temporary statement to invoke the compiler
# Place the -L before any args incase there are any mpi libraries in there.
# Eventually, we'll want to move this after any non-MPI implementation 
# libraries
#
if [ "$no_rpath" = "yes" ]; then
    rpath_opt="-Xlinker --enable-new-dtags"
else
    rpath_opt="-Xlinker --enable-new-dtags -Xlinker -rpath -Xlinker \"${libdir}${MPILIBDIR}\" -Xlinker -rpath -Xlinker \"${libdir}\""
fi
if [ "$linking" = yes ] ; then
    if [ "$nativelinking" = yes ] ; then
        $Show $F77 $PROFILE_INCPATHS ${final_fflags} ${final_ldflags} $allargs -I\"${includedir}\" -I\"${includedir}/mpi\"
        rc=$?
    else
        $Show $F77 $FFLAGS $allargs -I\"${includedir}\" -I\"${includedir}/mpi\" -L\"${libdir}${MPILIBDIR}\" -L\"${libdir}\" $rpath_opt $mpilibs $I_MPI_OTHERLIBS ${final_ldflags}
        rc=$?
        if [ $rc -eq 0 -a "x$strip_debug_info" = "xyes" ] ; then
            $Show objcopy --only-keep-debug ${executable} ${executable}.dbg
            $Show objcopy --strip-debug ${executable}
            $Show objcopy --add-gnu-debuglink=${executable}.dbg ${executable}
        fi
    fi
#        if [ "$static_mpi" = no ] ; then
#          $Show $F77 $PROFILE_INCPATHS ${final_fflags} ${final_ldflags} "${allargs[@]}" -I$includedir -L$libdir $f77libs $PROFILE_PRELIB $PROFILE_FOO ${wrapper_dl_type_flags} -lmpi  $PROFILE_POSTLIB ${final_libs} 
#        else
#          $Show $F77 $PROFILE_INCPATHS ${final_fflags} ${final_ldflags} "${allargs[@]}" -I$includedir -L$libdir $f77libs $PROFILE_PRELIB $PROFILE_FOO ${wrapper_dl_type_flags} $libdir/libmpi.a  $PROFILE_POSTLIB ${final_libs} 
#        rc=$?
#    fi
else
    cmd_line="$F77 $PROFILE_INCPATHS ${final_fflags} $allargs -I\"${includedir}\" -I\"${includedir}/mpi\""
    if [ "$Show" = echo ] ; then
        echo $cmd_line
    else
        eval `echo $cmd_line`
    fi
    rc=$?
fi
if [ -n "$rmfiles" ] ; then
    for file in $rmfiles ; do
        objfile=`basename $file .f`
    if [ -s "${objfile}.o" ] ; then
        # Rename
        destfile=`echo $objfile | sed -e "s/.*$$-//"`
        mv -f ${objfile}.o ${destfile}.o
    fi
        rm -f $file
    done
    rm -f $rmfiles
fi
exit $rc
