
2D models of electric machines: permanent magnet and wound field synchronous machines, induction machines.

[[Category:GetDP]]
[[Category:Electromagnetism]]

<!--

Machine examples in this directory:

--------------------------------------------------------------------
1) Eight-pole permanent magnet synchronous machine - GRUCAD, Universidade
Federal de Santa Catarina, Brazil

Used in:
M.V. Ferreira da Luz, P. Dular, N. Sadowski, C. Geuzaine, and J.P.A. Bastos,
"Analysis of a Permanent Magnet Generator With Dual Formulations Using
Periodicity Conditions and Moving Band",
IEEE Trans. Mag., Vol 38, No. 2, pp. 961-964, 2002.
http://orbi.ulg.ac.be/handle/2268/22771

pmsm_data.geo

pmsm.geo
pmsm_rotor.geo
pmsm_stator.geo

pmsm.pro
pmsm_8p_circuit.pro

--------------------------------------------------------------------
2) Eight-pole permanent magnet synchronous machine - GRUCAD, Universidade
Federal de Santa Catarina, Brazil Same machine as previous one, but geometry has
not been simplified here.

Used in:
J. Gyselinck, N. Sadowski, P. Dular, M.V. Ferreira da Luz, J.P.A. Bastos, and W. Legros,
"Harmonic Balance Finite Element Modelling of a Permanent-Magnet SynchronousMachine",
Proceedings of CBMag 2002.
http://beams.ulb.ac.be/biblio/harmonic-balance-finite-element-modelling-of-a-permanent-magnet-synchronous-machine-0

J. Gyselinck, P. Dular, L. Vandevelde and J. Melkebeek, A.M. Oliveira and P. Kuo-Peng,
"Two-dimensional harmonic balance finite element modelling of electrical machines taking motion into account", COMPEL, Vol. 22, No. 4, pp. 1021-1036, 2003.
http://www.emeraldinsight.com/journals.htm?articleid=1455338

pmsm_cbmab_data.geo

pmsm_cbmag.geo
pmsm_cbmag_rotor.geo
pmsm_cbmag_stator.geo

pmsm_cbmag.pro
pmsm_8p_circuit.pro

--------------------------------------------------------------------
3) Eight-pole permanent magnet machine

Model from:

E.A. Lomonova, E. Kazmin, Y. Tang, J.J.H. Paulides, "In-wheel PM Motor:
Compromise between High Power Density and Extended Speed Capability", COMPEL:
The International Journal for Computation and Mathematics in Electrical and
  Electronic Engineering, Vol. 30, No. 1, pp. 98-116, 2011.
Work presented at Ecologic Vehicles-Renewable Energies (EVRE), Monaco, March 26-29, 2009
http://www.emeraldinsight.com/journals.htm?articleid=1906093

With Concentrated or distributed windings (different parameters for the geometry)

lomonova_data.geo

lomonova.geo
lomonova_rotor.geo
lomonova_stator.geo

lomonova.pro
lomonova_circuit.pro

--------------------------------------------------------------------
4) Four-pole wound field synchronous machine

Used in:

J. Gyselinck, L. Vandevelde, J. Melkebeek, W. Legros,
"Steady-State Finite Element Analysis of a Salient-Pole Synchronous Machine in
the Frequency Domain",
Proceedings Electrimacs 2002, Montréal, Canada, August 18-21, 2002, 6 pages.
http://hdl.handle.net/1854/LU-160736

wfsm_4p_data.geo

wfsm_4p.geo
wfsm_4p_rotor.geo
wfsm_4p_stator.geo

wfsm_4p.pro
wfsm_4p_circuit.pro

--------------------------------------------------------------------

5) TEAM workshop problem 30a - Induction motor analysis
http://www.compumag.org/jsite/team.html

t30_data.geo

t30.geo
t30_rotor.geo
t30_stator.geo

t30.pro

--------------------------------------------------------------------
6) Four-pole 3kW-induction machine from Johan Gyselinck's PhD

J. Gyselinck, "Twee Dimensionale Dynamische Eindige-Elementenmodellering van
Statische en Roterende Elektromagnetische Energieomzetters",
Doktoraatsthesis, Universiteit Gent, 2000.

Some articles where it has been used:
J. Gyselinck, L. Vandevelde, and J. Melkebeek,
"Multi-slice modeling of electrical machines with skewed slots - The skew
discretization error,” IEEE Trans. Magn., vol. 37, pp. 3233–3237, Sept. 2002.

J. Gyselinck, L. Vandevelde, P. Dular, C. Geuzaine, W. Legros,
"A General Method for the Frequency Domain FE Modeling of Rotating
Electromagnetic Devices", IEEE Trans. Magn., Vol. 39, No. 3, May 2003.

im_3kW_data.geo

im_3kW.geo
im_3kW_rotor.geo
im_3kW_stator.geo

im_3kW.pro
im_3kW_circuit.pro

--------------------------------------------------------------------
7) Four-pole induction machine

Used in:

S. Guérard, J. Gyselinck, and J. Lecomte-Beckers,
"Finite element modelling of an asynchronous motor with one broken rotor bar,
comparison with the data recorded on a prototype and material aspects",
Bulletin Scientifique de l'AIM, Vol.1, pp. 13-22, 2005.
http://hdl.handle.net/2268/38463
Prix Melchior Salier 2004 du meilleur travail de fin d'études section
électromécanique-énergétique.

im_data.geo

im.geo
im_rotor.geo
im_stator.geo

im.pro
im_circuit.pro

-->
